LOBA RS3 8 Pot Front Brake Upgrade Kit

 

photo 32Brembo 8 pot callipers (black), with AP Racing 48 Vane Directional rotors for the RS3

the assembly uses “ Float in the Bell” Technology, float is limited to 0.2mm compared to 0.5-0.7mm float disc systems such as Alcon or less capable AP racing setups

Custom rate developed bobbin springs allow design axial and radial float whilst maintaining OEM levels of noise.

Assembly’s proven to demonstrate excellent heat management by design in testing due to axial flow of air from behind the bearing to the centre of the disc via 48 vanes and a 17mm air gap, provision is also made for front face cooling via recessed vents on the reverse bell face.

Disc Rotor is Supplied assembled Rotor size is 362mm, thickness is 32mm, complete disc weight 8.7Kg Uses a pair of supplied brembo 8 pot callipers Comes with braided steel brake lines Your choice of Grooved or Drilled Rotors Brake pads not included 3.2Kg lighter vs complete stock set-up Removing a massive amount of unsprung weight from the front axle due to being lighter, increasing braking performance, and improving handling.  photo 51

When used with performance pads and hi-temp brake fluid, you will have a proven and truly fantastic track and fast road set-up.